Features flexible long lasting seal and stainless steel hardware. Wingnut can be reversed for tamper free use. Easy to secure drain plug for use in WaterMaster, WaterMatic, and Genesis GC2 family waterers. This plug is also used in the Classic Equine Autofounts and OmniMaster 8.

Maintain the water level in your larger Ritchie automatic waterer. Easily adjust the water level using by loosening and tightening the wing nut. Standard float that is used in all larger waterer series.

Replacement 3/4″ valve bracket for larger units with a standpipe.

Replacement pin package for the 3/4″ valve

Valve gasket package include 5 gaskets per package

Protect your water line with our cable heater. Wired through your waterers thermostat, the cable heater will provide 8 feet of protection to prevent freezing along your valve and water supply line

Easily adjust the temperature of your heating elements by moving further away or closer to the center of heating element.

Used on the OMNI 5, OMNI 10 and 5E to drain water from the trough.

*washers sold separately.  Part number 18075

Used in the CattleMaster series units this drain plug features a stainless steel nut and bolt.

Regulate and easily adjust your automatic waterer level using the Ritchie float with long arm. Standard float that is used in the WaterMatic 100, WaterMatic 150, WaterMatic 150S, Ecofount and Classic Equine waterers.

Regulate your water flow with the Ritchie 1/2 inch valve. Ideal for water pressure between 60-80 PSI. The green valve is standard in all the StallFount waterers.

Mounted directly under the trough for overall heat coverage and reliable performance even under the most extreme winter conditions. Used on large Cattle waterers with stainless steel trough.

Give added heat protection to your all plastic Ritchie Waterers during the winter.  The Immersion Heater will protect the water in your trough and valve chamber by utilizing it’s built-in thermostat.

Give added heat protection to your all plastic Ritchie Waterers during the winter.  The Immersion Heater will protect the water in your trough and valve chamber by utilizing it’s built-in thermostat.

Used in all modern units with metal troughs

Drain plugs are designed to seal the trough at the drain pipe location and for removal for easy cleaning. Made of black rubber material. Each package contains two drain plugs.

Regulate your water flow in your larger Ritchie automatic waterers with the Ritchie 3/4″ valve series. A variety is available to accommodate your incoming water pressure.

This stand pipe is used in large Omni units

Securely mount your valve to the side of the valve chamber. Standard Valve Bracket in the following units WaterMatic 100, 150 & 150S, Omni 1 & 2, EcoFount series, Pork Kings, steel Stall Founts and Thrifty King for Swine and accommodates all 1/2″ pressure valves.