Regulate your water flow in your larger Ritchie automatic waterers with the Ritchie 3/4″ valve series. The Green 3/4″ valves are ideal to use with pressures that range between 60-80 PSI
Features flexible long lasting seal and stainless steel hardware. Wingnut can be reversed for tamper free use. Easy to secure drain plug for use in WaterMaster, WaterMatic, and Genesis GC2 family waterers. This plug is also used in the Classic Equine Autofounts and OmniMaster 8.
Maintain the water level in your larger Ritchie automatic waterer. Easily adjust the water level using by loosening and tightening the wing nut. Standard float that is used in all larger waterer series.
Protect your water line with our cable heater. Wired through your waterers thermostat, the cable heater will provide 8 feet of protection to prevent freezing along your valve and water supply line
Stainless Steel Fenwal Thermostat used in all larger style units with stainless steel troughs.
The adjustable range of the Fenwal Thermostat is from 0° F (-18° C) to 100o F (38° C). The thermostat is not preset at factory. To adjust the thermostat to the desired temperature, first fill the trough to proper water level then check the water temperature with a thermometer. The next morning, check the water temperature again. If the water is warmer than desired, turn the thermostat down (clockwise). If there is ice forming on the surface of the water, turn the thermostat up (counter clockwise). Only slight adjustments should be made to the thermostat at any time. A 1/16 turn on the thermostat will change the water temperature 7° F (4° C). The most economical temperature for the trough is 44° F (7° C).
Regulate and easily adjust your automatic waterer level using the Ritchie float with long arm. Standard float that is used in the WaterMatic 100, WaterMatic 150, WaterMatic 150S, Ecofount and Classic Equine waterers.
Regulate your water flow with the Ritchie 1/2 inch valve. Ideal for water pressure between 60-80 PSI. The green valve is standard in all the StallFount waterers.
Mounted directly under the trough for overall heat coverage and reliable performance even under the most extreme winter conditions. Used on large Cattle waterers with stainless steel trough.
Mounted directly under the trough for overall heat coverage and reliable performance even under the most extreme winter conditions. Used on smaller waterers with stainless steel trough.
Give added heat protection to your all plastic Ritchie Waterers during the winter. The Immersion Heater will protect the water in your trough and valve chamber by utilizing it’s built-in thermostat.
Give added heat protection to your all plastic Ritchie Waterers during the winter. The Immersion Heater will protect the water in your trough and valve chamber by utilizing it’s built-in thermostat.
Drain plugs are designed to seal the trough at the drain pipe location and for removal for easy cleaning. Made of black rubber material. Each package contains two drain plugs.
Regulate your water flow with the Ritchie 1/2 inch valve. Rated for water pressures between 40-60 PSI. The red valve is a standard valve in the following units WaterMatic 100&150, Omni 1&2, Omni-2 Special, Ecofount 1&2, Genesis 1&2, Ezfount, AutoFount 1&2, UltraFount 1&2, Pork Kings Series, and Thrifty King for Swine.
Regulate your water flow in your larger Ritchie automatic waterers with the Ritchie 3/4″ valve series. A variety is available to accommodate your incoming water pressure.
Securely mount your valve to the side of the valve chamber. Standard Valve Bracket in the following units WaterMatic 100, 150 & 150S, Omni 1 & 2, EcoFount series, Pork Kings, steel Stall Founts and Thrifty King for Swine and accommodates all 1/2″ pressure valves.
Regulate your water flow with the Ritchie 1/2 inch valve. The white valve is an alternate valve that can be used in low pressure situations 5-40 PSI. Used in smaller Ritchie waterers.
Regulate your water flow in your larger Ritchie automatic waterers with the Ritchie 3/4″ valve series. A variety is available to accommodate your incoming water pressure.
